Emulator Setup

In order to use networking with AppleWin and winVICE, follow these steps first:

  • Install WinPCap, found in /utils/emulators/WinPcap_4_1_3.exe
  • In windows 10, go to “Control Panel” > “… Network Status…” > “Change Adapter Settings”
  • “Right-click” > “disable” every adaptors except your Ethernet Card.

If you have setup everything correctly, then “8bit Unity is easy!” will be printed in the UDP Demo.

— APPLEWIN —

The first time you run AppleWin, you will need to configure the emulator by clicking joystick and speaker icon:

  • Configuration > Model: Apple //e
  • Configuration > Ethernet Settings:
    • Ethernet > Uthernet
    • Select Interface: select your ethernet connection
  • Input > Joystick 1: Keyboard (cursors)
  • Sound > Device: Sound Card
  • Sound > Sound Cards: Mockingboards (in slots 4&5)

— ALTIRRA —

Altirra comes pre-configured with the dragoncart. These are the defaults settings:

  • “System” > “Hardware” > “600XL/800XL”
  • “System” > “Video” > “PAL”
  • “System” > “Video” > “Frame Blending”
  • “System” > “Devices”:
    • Click “Add”
    • Select “Cartridge devices” > “DragonCart”
    • Set Bridging mode to “NAT”
    • Click “OK”.

— VICE —

VICE comes pre-configured with the RR-Net. These are the defaults settings:

  • “Settings” > “C64 model settings”
  • Set C64 model to C64C PAL, PAL-G
  • “Settings” > “Cartridge/IO Settings” > “Ethernet settings…”
    • Set Ethernet to “RR Net”
    • Set Interface to the only device shown
    • Press “OK”.